Question and Answer regarding Subnetting concepts. Q.1 – What is the maximum number of IP addresses that can be assigned to hosts on a local
Concept of OSI(Open standard interconnection) – Process of communication between two nodes in a network can be divided into seven layers. Between users, flow of data
Ethernet – Ethernet is the most widely used local area network (LAN) technology. Ethernet is a link layer protocol in the TCP/IP stack, It was
Cisco device Switch uses four forwarding method:- Store and forward switching (data store in buffer and check error, so it is slow but it is very
Before you can manage SW1 remotely from PC1, you need to assign the switch IP address. By default you give Switch IP address in management vlan 1.
VLAN On Cisco switches, all interfaces belong to VLAN 1 by default. VLAN 1 is also considered the Management VLAN, and should be dedicated for
IP routing is the process of moving packets from one network to another network using routers. Once all routers know about all networks, a routed
CAM and TCAM Tables The MAC address table is stored in Content Addressable Memory (CAM). RAM queries a specific memory address, and then returns the